Comments
-
Regarding local management, I've noticed if I'm not on the local subnet, i.e. XO subnet, the interface is slow and can hang. But I noticed this on the Gen 6, too. Most of our systems have VLAN's and if you're coming from one of those, the performance is not great.
-
No issues with GVC x.1424 but GVC is not used much. But using NetExtender we're seeing issues with Windows users when they are not doing their Windows Updates. At first it was just a trigger response from the helpdesk but it actually did solve the issue. One person also had to reinstall NetExtender.
-
OK, I got it working after writing it all out and checking my work. Can't say exactly where. Note: the RADIUS settings in SonicWALL don't always work as I expected. In the RADIUS server settings under Users, Settings, Authentication, Configure Radius, (make sure you get the format right under advanced), and then "test" the…
-
Red faced here: just had to clear the cache (or try another browser). Oops
-
Just applied 5065 on a 570 and no issues reported except by me: When I click on Network, Interfaces, it does nothing. Tried many things, i.e. other menus logoff/login again. Just clicking Interfaces does absolutely nothing. FML, I'm going to have to call support. Can't reboot until maybe tonight. Maybe I've got corruption…
-
Hi @Larry, Thanks for this. This guide does not appear to cover SonicWAVE but there may be some crossover.
-
Hi @Ajishlal This is great. When I tried using the prompts, i.e. tab, for "export" it didn't show me any examples. One of the only commands which had no suggestions for variables. Do you have a complete list of CLI commands? Thank you, -Bob
-
So these people are traveling with an IP printer?
-
Been fine for me too, about a week now
-
Of course 5050 has a bug: it's been stable and fast for me...
-
Hi, Did you try it yet? It's ready for 570
-
You might be able to get your money back. I believe authorized resellers are supposed to give you 30-day return policy if you don't like it.
-
Cool. I don't have any spares but I'd like to try this if we ever make a change. Thanks again!
-
@preston Thank you. Can I do this without NSM subscription? If so, my bad: either I didn't read the instructions well enough, or documentation is so poor, I had no idea this was possible without a NSM cloud subscription.
-
The AP's should be in a separate DHCP from the scopes you see under Network. I asked a similar question here not too long ago if you can find it - the response was right on.